Shop by Photo Choose a link from the Hoffman Amplifiers parts catalog Non Stocked Items
Login Resistors Board Building Parts Amp trim/Handles Misc. Hardware
Logout Capacitors Hoffman Turret Boards Foot Pedals Screws/Nuts/Washers
Public Parts List Pots/Knobs Fuses/Cords/AC Reverb Items Tools/Batteries
Private Parts List Switches Jacks/Plugs/Connectors Guitar Strings/Books Bike Lighting Parts
Search the Parts Catalog Tube Sockets Lamps/Diodes/Channel Switching Chassis/Boxes Yard Sale
View Your Shopping Cart Tubes/Valves Transformers Wire/Cable -
image
Handles-Amp Trim Parts Capacitors Pots-Knobs Wire-Cable-Heat shrink
Jacks-Plugs-Connectors Lamps-Diodes-Channel Switching Pots-Knobs Tools and Batteries
Resistors Bike Light Parts Tube Sockets Fuse Holders-Cords-AC Items
Handles-Amp Trim Parts Pots-Knobs Tube Sockets Jacks-Plugs-Connectors
Circuit Board Building parts Handles-Amp Trim Parts Lamps-Diodes-Channel Switching Wire-Cable-Heat shrink
Jacks-Plugs-Connectors Lamps-Diodes-Channel Switching Wire-Cable-Heat shrink Screws-Nuts-Washers
Capacitors Circuit Board Building parts Lamps-Diodes-Channel Switching Jacks-Plugs-Connectors
Transformers Tube Sockets Pots-Knobs Tubes-Valves
Tube Sockets Pots-Knobs Tubes-Valves Chassis-Boxes
Fuse Holders-Cords-AC Items Fuse Holders-Cords-AC Items Switches Lamps-Diodes-Channel Switching
Misc Hardware-Grommets-Feet-Ring terminals Tube Sockets Transformers Bike Light Parts
Resistors Pots-Knobs Resistors Screws-Nuts-Washers
Transformers Hoffman Turret Boards Capacitors Capacitors
Handles-Amp Trim Parts Switches Pots-Knobs Pots-Knobs
Capacitors Pots-Knobs Jacks-Plugs-Connectors Foot Pedals
Misc Hardware-Grommets-Feet-Ring terminals Lamps-Diodes-Channel Switching Capacitors Lamps-Diodes-Channel Switching
Resistors Capacitors Fuse Holders-Cords-AC Items Tube Sockets
Wire-Cable-Heat shrink Jacks-Plugs-Connectors Handles-Amp Trim Parts Tools and Batteries
Transformers Transformers Reverb tanks and Bags Pots-Knobs
Foot Pedals Tube Sockets Tubes-Valves Lamps-Diodes-Channel Switching
Books Screws-Nuts-Washers Guitar Strings Hoffman Turret Boards
Screws-Nuts-Washers Tools and Batteries Capacitors Hoffman Turret Boards
Pots-Knobs Circuit Board Building parts Jacks-Plugs-Connectors Jacks-Plugs-Connectors
Tubes-Valves Tubes-Valves Jacks-Plugs-Connectors Tools and Batteries
Jacks-Plugs-Connectors Tubes-Valves Capacitors Pots-Knobs
Screws-Nuts-Washers Misc Hardware-Grommets-Feet-Ring terminals Chassis-Boxes Handles-Amp Trim Parts
Hoffman Turret Boards Switches Jacks-Plugs-Connectors Capacitors
Switches Tube Sockets Foot Pedals Pots-Knobs
Fuse Holders-Cords-AC Items Transformers Wire-Cable-Heat shrink Tube Sockets
Lamps-Diodes-Channel Switching Hoffman Turret Boards Misc Hardware-Grommets-Feet-Ring terminals Circuit Board Building parts
Jacks-Plugs-Connectors Tools and Batteries Switches Jacks-Plugs-Connectors
Lamps-Diodes-Channel Switching Switches Fuse Holders-Cords-AC Items Tube Sockets
You can scroll through the images above using the Image scroll controls or you can use the Left and Right arrow keys on your keyboard.
ratings image Click these to rate parts

Tube amp Circuit Board Building parts


Hoffman Pre Drilled Turret Boards are on this page

Design your own Turret Board

You can design your own turret board and have my CNC machine drill all the turret lug holes.
Create a custom turret board and put the holes anywhere you want them.
When you are done editing your turret board design, my program will send me a CNC file.
The CNC file is loaded into my CNC machine and the CNC machine drills all the lug holes
The photo on the left is a Hoffman Turret board loaded with parts
Wave your mouse over the picture to see a larger image

Go here to design your own turret board

Glass epoxy circuit board material

I now stock two colors - Natural and Black
.125 inch thick glass epoxy circuit board material.
3.125 inch wide, cut to your length

Shipping container lengths are a problem for long pieces of board.
The maximum board length I can ship to US customers is 36 inches.
The maximum length for international customers is 18 inches
I have more shipping information on this page. Shipping Information
The minimum board length I will cut is 6 inches.

All my board material is ripped from large sheets into 3.125 inch wide strips
I do not have any other width board material
When you press the button below, you will be taken to a form where you can enter your board lengths and colors.
Natural and Black prices are different, go to the length form to see prices
The black board is Non-Conductuve G10
Price each = $0.62

Customer Ratings Customer Ratings


Tall Turret Lugs for .125 inch board

Plated Turret Lugs for the 1/8th (.125) inch thick circuit board material I sell on this page
These lugs fit my Pre-drilled Hoffman style boards.
Turret lugs are more expensive than an eyelet because they are a solid piece of brass that is turned on a lathe type machine
Once the desired shape is there, the lugs are then sent to a plating company and plated with a very nice coating so that they can be soldered to.
Turret lug construction is much nicer than eyelet construction, IMO.
I have my turret lugs custom made for in batches of 100,000, these are not off the shelf lugs.
Use the 3/32" drill on the Tools page to drill the holes in your circuit board and install the turret lugs.
Use the lug and eyelet installation tool on the Tools page to install the lugs.
Go to this page to see how turret lugs are installed in a circuit board and how parts are mounted.
Order a couple more lugs than you need in case you damage one or the counting scale I use is off by a count of one
This item has quantity discount buttons

Customer Ratings Customer Ratings

Qty from 1 to 499 = 0.15 each - Qty -
Qty from 500 to 999 = 0.13 each - Qty -
Qty from 1000 to 99999 = 0.11 each - Qty -

Short Turret Lugs for .0625 inch board

Plated Turret Lugs for 1/16th (.0625) inch thick circuit board material
These lugs fit my Hoffman relay boards.
Use the 3/32" drill on the Tools page to drill the holes in your circuit board and install the turret lugs.
Use the lug and eyelet installation tool on the Tools page to install the lugs.
Go to this page to see how turret lugs are installed in a circuit board and how parts are mounted.
Order a couple more lugs than you need in case you damage one or the counting scale I use is off by a count of one
This item has quantity discount buttons

Customer Ratings Customer Ratings

Qty from 1 to 499 = 0.15 each - Qty -
Qty from 500 to 999 = 0.13 each - Qty -
Qty from 1000 to 99999 = 0.11 each - Qty -

Tall eyelets for .125 inch board

Tall eyelets for the 1/8" thick circuit board on this page.
You can use the pointy end of the turret lug tool I sell to flair out your eyelets.
Use the 1/8" drill on the Tools page to drill your circuit board for both eyelets sizes.
Note on installation: The eyelet goes into a hole on the board.
It sticks out past the back side of the board just a little.
You then swage or flair out the backside of the eyelet so that it stays on the board.
The lug and eyelet installation tool can be found on the Tools page.
Click here to see eyelet specs
This item has quantity discount buttons

Customer Ratings Customer Ratings

Qty from 1 to 499 = 0.06 each - Qty -
Qty from 500 to 999 = 0.05 each - Qty -
Qty from 1000 to 99999 = 0.04 each - Qty -

Short eyelets for .0625 inch board

Short eyelets for 1/16" thick circuit board.
These eyelets are like what was used on Vintage Fender amps
Note: I do not stock 1/16" thick board.
Use the 1/8 inch drill bit on the Tools page to drill holes for this eyelet.
See the description for the tall eyelets for more info
The lug and eyelet installation tool can be found on the Tools page.
Click here to see eyelet specs
This item has quantity discount buttons

Customer Ratings Customer Ratings

Qty from 1 to 499 = 0.05 each - Qty -
Qty from 500 to 999 = 0.04 each - Qty -
Qty from 1000 to 99999 = 0.03 each - Qty -

Tag Board

This tag board has 2 rows of tags x 28 tags per row
The length and width are 300mm x 56mm or 11.875 x 2.25 inches
It is 2mm or .082 inches thick
You can also install my tall eyelets into this board but my tall lugs may be a bit too long
Price each = $6.25

Customer Ratings Customer Ratings

Qty -

3 lug terminal strip

Terminal strips for custom circuit construction.
The mounting foot lug can also be used as a chassis grounding point.
The 3 lug strip has one ground-mounting foot
Use #6 hardware to bolt them down.
Note: I stock #6 hardware on the Screws/Nuts/Washers page
Price each = $0.70

Customer Ratings Customer Ratings

Qty -

5 lug terminal strip

Terminal strips for custom circuit construction.
The mounting foot lug can also be used as a chassis grounding point.
The 5 lug strip has one ground-mounting foot
Use #6 hardware to bolt them down.
Note: I stock #6 hardware on the Screws/Nuts/Washers page
Price each = $1.36

Customer Ratings Customer Ratings

Qty -

6 lug terminal strip

Terminal strips for custom circuit construction.
The mounting foot lug can also be used as a chassis grounding point.
The 6 lug strip has two grounds-mounting feet
Use #6 hardware to bolt them down.
Note: I stock #6 hardware on the Screws/Nuts/Washers page
Price each = $1.84

Customer Ratings Customer Ratings

Qty -

8 lug terminal strip

Terminal strips for custom circuit construction.
The mounting foot lug can also be used as a chassis grounding point.
The 8 lug strip has two grounds-mounting feet
Use #6 hardware to bolt them down.
Note: I stock #6 hardware on the Screws/Nuts/Washers page
Price each = $2.44

Customer Ratings Customer Ratings

Qty -

1/4 inch nylon #8 hole

1/4" Round nylon standoffs
#8 sized hole through the center, no threads
Use #8 screws and a 3/16 inch drill bit for the screw holes
I stock #8 hardware on the Screws/Nuts/Washers page
Drill bits are on the tools page
Price each = $0.20

Customer Ratings Customer Ratings

Qty -

1/4 inch nylon #6 hole

1/4" Round nylon standoffs
#6 sized hole through the center, no threads
Use #6 screws and a 1/8 inch drill bit for the screw holes
I stock #6 hardware on the Screws/Nuts/Washers page
Drill bits are on the tools page
Price each = $0.20

Customer Ratings Customer Ratings

Qty -

1/4 inch hex Standoff

Aluminum standoffs with threads
8-32 threads all the way through the center
Use #8 screws and a 3/16 inch drill bit
Note: I stock #8 hardware on the Screws/Nuts/Washers page
Price each = $0.43

Customer Ratings Customer Ratings

Qty -

1/2 inch hex Standoff

Aluminum standoffs with threads
8-32 threads all the way through the center
Use #8 screws and a 3/16 inch drill bit
Note: I stock #8 hardware on the Screws/Nuts/Washers page
Price each = $0.45

Customer Ratings Customer Ratings

Qty -

5/8 inch hex Standoff

Aluminum standoffs with threads
8-32 threads all the way through the center
Use #8 screws and a 3/16 inch drill bit
Note: I stock #8 hardware on the Screws/Nuts/Washers page
Price each = $0.60

Customer Ratings Customer Ratings

Qty -

3/4 inch hex Standoff

Aluminum standoffs with threads
8-32 threads all the way through the center
Use #8 screws and a 3/16 inch drill bit
Note: I stock #8 hardware on the Screws/Nuts/Washers page
Price each = $0.67

Customer Ratings Customer Ratings

Qty -

1 inch hex Standoff

Aluminum standoffs with threads
8-32 threads all the way through the center
Use #8 screws and a 3/16 inch drill bit
Note: I stock #8 hardware on the Screws/Nuts/Washers page
Price each = $0.75

Customer Ratings Customer Ratings

Qty -


Home - Ordering Information - PayPal info - Returning parts - Search the Hoffman Amps parts catalog
Q and A - Links - Shipping Info/policy - E-mail Me - Amplifier Service Technicians - About Hoffman Amps
Create your own custom Turret lug board

Hoffman Amplifiers Face Book Page

The Tube amp Library of information
Click the link above for Tube amp info, Schematics, Board building information, Projects, Mods, Transformer diagrams, Photo's, Sound clips.
There are hundreds of pages of Tube amp information on my library page.
Check out our huge library of Tube Amp schematics here
Please visit my Tube Amplifier Forum
Here's the place you can go to ask tube amplifier questions.
You will find a large community of friendly amp builders at the link above.