You can scroll through the images above using the Image scroll controls.
Or you can use the Left and Right arrow keys on your keyboard.
You can tap on an image to go to that catalog page.
The 3/32" Drill bits are used to install the turret lugs I sell.
Price each = $3.46
1/8 drill bit
The 1/8" Drill bits are used to install the eyelets I sell.
Price each = $3.44
3/16 drill bit
The 3/16" Drill bits are used to drill mounting holes in the circuit board material and your chassis. A #8 screw fits perfectly into a 3/16" hole with just a little wiggle room Use the standoffs on this page and #8 screws to mount your boards
Price each = $3.80
Small lead bender
(B) 1/4, 1/2 Watt lead bender Bends component legs 90 degrees Many small bodied parts fit into this tool Each tool has two sides with different body length slots Go to this page to see how this tool is used
Price each = $7.77
Large lead bender
(A) 1, 2, 3 Watt lead bender Bends component legs 90 Degrees Many large bodied components will fit into this tool Each tool has two sides with different body length slots Go to this page to see how this tool is used
Price each = $9.15
Solder
.032 inch - 0.8mm Diameter Rosin Core solder 2% Flux - 63/37 Approx. 100 grams of solder on the roll Use caution, this product contains lead
Price each = $6.46
Tube amp Bias Checker kit
Parts to make one Bias Checker Use the bias checkers to check the bias on 8 pin power tubes like - 6L6, 6V6, EL34 and 6550 Each Bias checker kit includes all the parts shown in the photo The bases have a wire hole already drilled Instructions on how to assemble this bias checker The dual banana plug has a center to center spacing of .75 inch If your multi meter has a different spacing, you can use individual banana plugs I sell Red and Black single banana plugs on this page Jacks and Plugs page
Price each = $14.69
Kit Item
Option
Kit Qty
Price each
Tube amp Bias Checker kit x 2
Parts to make two Bias Checkesr Use the bias checkers to check the bias on 8 pin power tubes like - 6L6, 6V6, EL34 and 6550 Each Bias checker kit includes all the parts shown in the photo The bases have a wire hole already drilled Instructions on how to assemble this bias checker The dual banana plug has a center to center spacing of .75 inch If your multi meter has a different spacing, you can use individual banana plugs I sell Red and Black single banana plugs on this page Jacks and Plugs page
Price each = $29.38
The Tube amp Library of information
Click the link above for Tube amp info, Schematics, Board building information.
Projects, Mods, Transformer diagrams, Photo's, Sound clips.
There are hundreds of pages of Tube amp information on my library page.
Please visit my Tube Amplifier Forum
Here's the place you can go to ask tube amplifier questions.
You will find a large community of friendly amp builders at the link above.