You can scroll through the images above using the Image scroll controls.
Or you can use the Left and Right arrow keys on your keyboard.
You can tap on an image to go to that catalog page.
16 pin Socket for the relays below Solder the sockets to your board and then plug the relays into the sockets Note that the relays only use 8 of the 16 pins on the socket Snip off the extra pins on the socket for use on my relay boards See this page for socket and relay install tips and relay schematic Socket and Relay install tips
Price each = $0.60
5 volt small signal switching relay
DPDT small signal switching relay. Used for channel switching The relay has a 5 volt coil rated at 40ma Relay body is 10mm wide x 20mm long x 8mm high Contacts are rated 1 amp at 30vdc See this page for socket and relay install tips and relay schematic Socket and Relay install tips
Price each = $8.31
Tremolo Optoisolator
Fender style Tremolo optoisolator Used on many Fender combo amps and heads Copper colored leads are the bulb leads
Price each = $8.49
Mounts into a 10mm hole. Square front bezel shape. Just solder two wires to this lamp. One wire goes to the neutral/white power cord wire. The other wire goes to the hot/black power cord wire after it comes out of your main power switch.
Price each = $2.70
Bulb and colored jewel not included Pick out your jewel color below and add a bulb also. Hole size required is 11/16 inch Fender Lamp lock washers are locataed on this page Misc hardware Page
Price each = $8.67
6.3 volt lamp bulb
Fits Fender lamp assemblies.
Price each = $0.73
Colored jewels
Jewels for the Fender lamp assemblies Red, Green, Amber, Blue and Purple. Note: The purple jewel looks blue until you put it in front of the bulb. The bulb has a yellow tint to it, so the combo seems to make purple
Price each = $6.07
12 Volt Zener Diode - A
A - 12 Volt .5watt Zener Diode Used in the DMars amp project
Price each = $0.18
1 amp 50 volt diode - B
B - Power supply diode 1N4001/50v, 1 amp rating.
Price each = $0.15
1 amp 1000 volt diode - B
B - Power supply diode 1N4007/1000V, 1 amp rating Used as a bias or mains diode in many amps
Price each = $0.22
3 amp 1000 volt diode - C
C - Power supply diode 1N5408/1000V 3 amp rating, extra heavy duty diode.
Price each = $0.35
5 Volt Regulator
7805 TO220 package 5 volt voltage regulator Used to create relay power supplies from the 6.3volt heaters
Price each = $0.85
1000v - 3 amp bridge
B - Bridge rectifier 3 amp/1000Piv rating, 3/4" X 3/4", #6 screw hole. Nice small bolt down package. For power transformers that require a bridge rectifier. Used with the Mojo779 stand alone reverb and Re-Vibe unit power tranny. This bridge is rated up to 1000 volts piv.
Price each = $1.17
500v 2.5 amp mosfet
Mosfet in TO220 package This is the mosfet used in the D'Mars forum project That project can be found here on the Hopffman Amps forum D'Mars forum project info
Price each = $1.98
The Tube amp Library of information
Click the link above for Tube amp info, Schematics, Board building information.
Projects, Mods, Transformer diagrams, Photo's, Sound clips.
There are hundreds of pages of Tube amp information on my library page.
Please visit my Tube Amplifier Forum
Here's the place you can go to ask tube amplifier questions.
You will find a large community of friendly amp builders at the link above.