|
|
Judco Switches
The Judco switches on this page come in three body types, Tall, Short and Flat
Some switches have push on terminal connectors or you can solder wires to these style connectors.
Some switches have wire leads
There are several contact types available
SPST, SPDT, NO = Normally open and NC = Normally closed
Momentary means that the switch only does something when you press the plunger, then it goes back to it's original state when you release the plunger
NO = Nothing passes through the switch until you press the plunger, then the contact points make contact
NC = Current passes through the switch all the time, the contact points open up and break the circuit when you press the plunger
Click means that there is a clicking action when you press the plunger
No Click mens that there is no clicking action when you push the plunger
The Tall and Short switch bodies
The Tall and Short switch bodies are the same, but the plunger heights and thread heights are different
The Tall And Short switch bodies are approx. 17mm Long x 13.5mm Wide x 8mm high
The Short plunger switches fit into the External Marwi switch housings that I sell on this page
The Tall and Short switches come with a plastic mounting nut and you can get rubber boots for each style to keep water and dirt out of the switch
The Tall and Short switches will fit into the Old style Bell shaped Marwi light bodies
The Flat body switches
The switch bodies are approx. 15.4mm wide x 17mm long x 6.5mm high
The Flat body switches fit into the newer Bullet shaped Marwi housings.
They slide into the Marwi housings and lock in place with a metal pin
|
