---

---

Hoffman Amplifiers Eyelet Board Order Page

Watch this Shopping cart tips video

Hand wired point to point eyelet boards

You have a choice of FR4/G10 Glass epoxy board material in two colors
The FR4/G10 eyelet boards do not need a backing board, you mount FR4/G10 boards with standoffs
You can order the boards below with just the holes drilled or with the eyelets installed

Click on the Name-Layout Link for each board to see the board build information link
Note that the boards below do not have wire holes
If you want wire holes or mounting holes, you will have to drill those
All my eyelet boards are 3.125 inches tall x the widths listed in the table below.
I recommend using FT caps for my Filter cap boards

Eyelets and standoffs are located on this page
Eyelet and Turret Lug staking tools are located on this page
Hoffman Turret boards are on this page
Fender Eyelet Boards are on this page

Click on the small images to see larger images
Drilled Board price is for the board with drilled holes only and no eyelets
Installed Board price has the holes drilled and the eyelets installed

#	Make	Name Layout	Model	Drilled Price	Board Color	Installed Price	Details	Image	Board Length	Holes
1	Robinette	Black Vibe	V2.2	Drilled Only		Eyelets Installed			9.400	45
2	Robinette	Black Vibe	V2.2	Drilled Only		Eyelets Installed			9.400	45
3	Dumble	Steel String Slinger		Drilled Only		Eyelets Installed			31.000	185
4	Dumble	Steel String Slinger		Drilled Only		Eyelets Installed			31.000	185

You can also have custom Turret boards and eyelet boards made
See this post on my amp forum about having custom boards made

There is a large collection of amp schematics and layout diagrams in my Schematics Library here

---